Davies Craig, 115L/minElectric Water Pump & LCD Controller, 12V (8850)

More Views

Davies Craig, 115L/minElectric Water Pump & LCD Controller, 12V (8850)

Product SKU : 8850

$399.99 NZD (inclds GST)

EWP115 Alloy & LCD Digital Controller Combo (12V) Part No: 8850

The revolutionary EWP®115 is now available in light weight aluminium bundled with our Digital Controller. Designed with the high-performance pro, sprint, tarmac, circuit and drag racer in mind this rugged Alloy electric water pump has AN-16 internal threads at inlet and outlet for neat, tight, dash fitting applications. All the same exciting features offered on the EWP®115 are here on the street-smart alloy EWP. The LCD EWP® & Fan Digital Controller is scientifically calibrated to manage the flow rate of engine coolant to lock onto a targeted engine temperature.

 

EWP COMPONENTS

 HARDWARE BAG COMPONENTS

Part #

Description 

Qty 

Part #

Description

Qty

8140

EWP115 Alloy Short Kit

1

0513

Scotch Lock

1

18000

EWP & FAN Controller

0550

Ring Terminal

1

0415

Inline Adaptor

1

0574

Ring Terminal (Yellow)

1

8411

Wiring Harness (10A Fuse)

1

0613

Self Tap Screws

1

8510

Thin Rubber Sleeves 3mm

2

8414

Temp Sensor Assembly

1

8512

Hose Clamps

4

     

8530

EWP Hardware Bag

1

     

 
 
 
LCD EWP & FAN DIGITAL CONTROLLER - 12 & 24 VOLT
Davies Craig Pty Ltd is very pleased to announce the arrival of the updated Liquid Crystal Display (LCD) EWP®/Fan Digital Controller!
 
This LCD EWP®/Fan Digital Controller (Part #8000) is Australian designed and as part of this Australian manufacturing company’s continuous improvement program this advanced Digital Controller boasts a suite of enhancements.
 
These include:
• The prominent blue Liquid Crystal Display screen (pictured)
• Now suitable for all 12v & 24v electrical systems, with relevant displays
• Genuine Thermometer, with coolant and targeted/set temp. displays
• Diagnostic check & warm-up signals
• Nine (9) targeted/set coolant temperatures, 60C (140F) to 100C (212F)
• Flashing “EWP®” logo signifying water pump in operation
• Davies Craig Thermatic® Fan logo, circulating signifying fan in operation
• Flashing High & Low Voltage indicators
• Low & High Temp indicators
• Audible alarm -
* if coolant temp doesn’t exceed 40ºC (104ºF) within 5 mins of start-up
* when coolant temperature exceeds 10ºC (50ºF) of set/target
* when coolant temperature exceeds 100ºC (212ºF)
• Above Set/Target Temperature indicator accompanies audible alarm
• Temperature Sensor short & open circuit indicators
• Automatic time-out, EWP® runs for 3 minutes or until engine temp has reduced to -10◦C (-14F) below set/targeted temp whichever occurs first.
 
The updated Davies, Craig LCD EWP®/Fan Digital Controller (#8000) as an engine management component has undergone extensive research, development, vehicle and test centre scrutiny.
 
The updated LCD Digital Controller how has two specific functions. This unique Controller will now manage the operation of the EWP® by varying the speed of the EWP® in response to the temperature of the engine and manage control of your electric engine fan. The Controller has a push-button on the facia panel that offers target temperatures, 60ºC (140°F) 65ºC (150°F) 70C (160°F) 75ºC (165°F) 80ºC (175°F) 85ºC (185°F) 90ºC (195°F) 95ºC (205°F). Generally, higher engine temperature will offer improved fuel efficiency and lower engine temperature more power. The LCD Digital Controller will now operate the engine’s electric fan automatically once the engine has reached +3c above the target temperature. A significant benefit too is the Controller allows the EWP® to run on after ignition shutdown to reduce heat soak. It is recommended that engine operational temperatures be checked with manufacturer.
 
The LCD Digital Controller can be used with our EBP however it is not recommended as it will not vary the speed of the pump in response to temperature but rather simply turn the pump on and off once the top end temperature is reached. For a far more economical & appropriate solution, we would recommend Part Number 0401 & 0444 to turn the EBP on and off at your set temp.
 
*Note: This controller (Part No. 8000) is set up for negativley earthed systems however with a wiring adjustment, can also handle positive earthed systems.
 

Additional Information

Freight Cost : $10.00 Within NZ - Includes Tracking
Additional info : Orders are shipped daily via NZCouriers at 3:30PM. Tracking is emailed to buyer. NZCouriers are generally overnight delivery. Rural delivery can take 2-3 days.

Customer Reviews

Write Your Own Review

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Quality
Value
Price