Davies Craig Digital Thermatic Fan Switch Kit,12V / 24V, (0444)

More Views

Davies Craig Digital Thermatic Fan Switch Kit,12V / 24V, (0444)

Product SKU : 0444

$78.37 NZD (inclds GST)

The DC Digital Thermatic Fan Switch Kit can be used with our Thermatic Fans and competitors Fans. It senses air temperature as it passes through the radiator with the sensor placed in the radiator fin section, so no need to cut hoses or can be placed directly into the coolant system.

It can be used for 12 or 24 volt applications and has an adjustable temperature range of 40ºC to 110ºC (104ºF to 230ºF) which can show Centigrade or Fahrenheit. Temp is set by pressing the set button. It can run 1 or 2 fans. The second fan (if applicable) will start 10 seconds after Fan #1 runs. It operated thermally & also when the air conditioning is in operation.

Can be used in 12 & 24 Volt applications.

*Note: Kit sold in 12 volt configuration, for 24 volt application, you will need to change the two relays with 24 volt units which are not supplied in the kit.


It senses air temperature as it passes through the radiator and has an adjustable temperature range of 40ºC to 110ºC (104ºF to 230ºF).
The Temperature Sensor is placed in the radiator fin section as close to the hot coolant inlet as possible, no need to cut hoses or can be placed directly into the coolant system.

*Note: Kit sold for radiator fin application.


This switch is operated thermally & also when the air conditioning is in operation.

Simply set the temperature by pressing the set button.
It can run 1 or two fans. The second fan (if applicable) will start 10 seconds after Fan #1 runs. 
 
The fans will operate until the air temperature is reduced by 5 degrees (C) from the set temperature.
 
 
SPECIFICATION

  • Max voltage: 12 to 27V (For 24V, relays need to be changed, not supplied in kit)
  • Max current: 40A per Fan
  • Relay setup: Dual relay
  • Speed: Single speed, 10 second delay to start up the second fan
  • Applications: Suitable for single and dual fan applications
  • Screen Display: LED digital temp display, actual temp + set temp
  • Temp Display: Centigrade or Fahrenheit
  • Temp settings: 40°c to 110°c  (104°F to 230°F)
  • Temp setting: Push Button
  • Circuit type: Pre-programmed micro controller
  • Output wires: Batt + Batt - IGN, AC Clutch, Fan #1, Fan #2 Thermistor Probe
  • Dimensions: 95x65x56 mm

*Note: if using this switch for use with our EWP's, it will not vary the speed of the pump in response to engine temperature but rather turn the pump on and off at your set temperature. For EWP control, we would recommend part number 8000 which can manage both the EWP and your Thermatic Fans.

 

0444 (28July2015).jpg 

 

Additional Information

Freight Cost : $7.50 Within NZ - Includes Tracking
Additional info : Orders are shipped daily via NZCouriers at 3:30PM. Tracking is emailed to buyer. NZCouriers are generally overnight delivery. Rural delivery can take 2-3 days.

Customer Reviews

Write Your Own Review

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Quality
Value
Price